Wireless NVR, 8 Channel

This 8 Channel NVR comes with a built-in Access Point (AP) that is for use with compatible WiFi cameras we sell that pair easily with this NVR, or with any of our wired IP cameras using an AP that is synced to this recorder’s built-in wireless AP. It supports up to a total of 8 cameras, whether they be wireless or wired; you can mix and match both types of cameras up to 4K in resolution.

We recommend this NVR for users looking to setup a wireless security camera system for short range wireless transmission up to 250ft (clear line of sight). By using select plug-&-play wireless security cameras we carry, the cameras pair easily to the NVR without any need of configuration from the user, and allow communication between the camera and NVR for easy configuration changes. Here’s how easy it is to connect cameras to this NVR:

This network video recorder uses WiFi signals to reduce interference and allow signal transmission through obstructions while maintaining clear video quality. It is important to note that WiFi signals introduce a slight delay in the video feed of up to 1 second between the action happening in real life, and it being seen on the recorder. WiFi allows a digital data signal to be sent from the camera to this NVR, where the digital signal can be composed of video, audio, and PTZ controls. Not only can you used fixed lens bullet or dome wireless IP cameras, but you can also use our wireless PTZ cameras. In fact, by using methods detailed in our wireless security camera guide, you can make our wired IP cameras wireless by using a wireless access point and pair them with this recorder.

You can even use this NVR with wired cameras on the network by connecting the NVR and wired IP camera to the same PoE switch. As long as the NVR and the camera are on the same network with properly configured IP addresses, they will be able to communicate with each other.

If you are interested in learning more, be sure to read our guide how to choose a security camera.

This is a standalone surveillance video recorder because you do not have to connect it to a computer. It is a computer itself, and comes with its own embedded processor and Linux Operating System which stays virus free. It will never need any maintenance from a computer IT person, saving you a lot of undue costs. It has a friendly easy to use graphical user menu that can be controlled using the included mouse with point & click.

Using our tested and compatible wireless network cameras you can easily setup a wireless system and stream video at resolutions up to 3MP in real time. Here is a list of compatible wireless cameras:

• Wireless IP Security Camera 3MP, WC3MP
• Wireless Dome IP Camera 4MP, WD4MP
• Outdoor Wireless PTZ Camera, Microphone, Starlight Night Vision, IPSDIR3XWIFI
• Wireless 2K PTZ Camera 4X Zoom, IPSDMW4MP
• Wireless Outdoor Mini PTZ Camera 1080P HD, IPSDMW
• Wireless Two-Way Audio Security Camera, Indoor, IP4MPWA

There is 1 SATA port for one hard drive up to 6TB in capacity. If you need more room, you can set some or all of your cameras to record on motion detect only. It also has a USB port for easy video backup of short segments to a external USB hard drive. You can also set live video backups to FTP or NAS.

This NVR comes with Free Technical Support from our team based in the USA. All the cameras we sell at CCTV Camera World are compatible with our NVR recorders, and Tribrid DVRs. If you are looking for compatibility with cameras purchased elsewhere, please be sure to review our IP camera compatibility list.

Features

• 8 Camera NVR recorder
• Use with wired IP network or Wireless IP Cameras
• Built-in Wireless AP – 250ft range clear line of sight
• H.265 and H.264 Support
• Dual Stream Video Encoding
• Records resolutions up to 8MP 4K
• 80Mbps Encoding bandwidth
• 24Mbps Wireless incoming bandwidth
• Live Monitoring and video playback on Smartphones including iPhone, iPad, and Android based phones and tablets
• Auto network camera detection for easy camera setup
• 4K HDMI video output
• 1080P VGA video outputs
• CMS Software for remote viewing via Windows or Mac computers
• Motion activated recording or schedule based recording
• Motion detection and video loss alerts to your mobile device
• Remote backups to a NAS, FTP, windows computer, or mirroring to another NVR unit
• Easy video offload to a USB flash drive
• Supports 1 SATA hard drive up to 6 TB
• Allows up to 10 simultaneous users for remote viewing
• Built-in wireless AP
• ONVIF 2.4 compliant

What’s Included?

• (1) 8 Channel NVR
• (2) Antennas
• (1) Power Supply
• (1) Mouse

Specifications